Plane erase/delete depended..... 3

[CAD2015]

Hi,

How could I delete the dependency of a plane?
The plan in the picture was created using the surface of the tube.



I want to make this plan independent......
How could I do that?....

Thank you,

 

[cowski]

One way is to edit the datum plane and turn off the "associative" option in the settings. This will convert the datum plane to a "fixed" datum plane.

 

[CAD2015]

Thank you!

 

[SDETERS]

You could toss another plane or csys in the same place, edit the sketch, reattach the sketch to the new plane or csys, then move this plane.

 

[CAD2015]

SDETERS,​

How could reattach the sketch to a new plane or csys? Which is the first step?
I want to reattach the sketch in the picture below. The dialog is open, but I do not see something like reattach or similar...

 

[MANox]

Hello,

You must open sketch and select "reattach sketch" function:


Best regards
MANok

 

[CAD2015]

Thanks a lot!