Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design an online moisture absorption desorption system using waste hea

Status
Not open for further replies.
fahims

fahims

Bioengineer
Joined
Nov 11, 2003
Messages
10
Location
DE
Hallo all
I want to design a system using waste heat from a process to regenerate the bed of a continuous absorption desorption unit. It consists of two beds in which one bed is regenerated while other is in use(pressure swing cycle). The unit is used to remove moisture from oil free air. Any help will be appreciated.
 
Sort by date Sort by votes
Are you trying to convert a pressure swing adsorption system (healtess dryer) to a heat reactivated dryer - ie., using heat-of-compressor or waste steam? Please give more details.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

seuenergy
  • Question Question
Zone classification for sewage storage and packing system
Replies
13
Views
20K
seuenergy
seuenergy
RogerSAM
  • Question Question
String Testing of a Lube Oil System
Replies
10
Views
13K
RogerSAM
RogerSAM
R
  • Question Question
Vapor recovery unit (VRU) design and methodology
Replies
4
Views
19K
georgeverghese
georgeverghese
MSL93
  • Question Question
Design Pressure due to Deflagration
Replies
5
Views
5K
seuenergy
seuenergy
SF6-146
  • Locked
  • Question Question
Requesting Feedback on P&ID Design for a Cold Water Supply System with Duplicated Pumps
Replies
6
Views
2K
pierreick
pierreick

Part and Inventory Search

Sponsor

Back
Top