Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design code for tower cranes

Status
Not open for further replies.

LeoOffshores

Structural
Mar 5, 2011
4
0
0
I wonder what are the codes to design (structral) tower cranes.
Does CSA Z248-04, have a complete formulation to do this?
I also took a look at DIN 15018 but it is too old.
Thanks.
 
Replies continue below

Recommended for you

CAN/CSA-Z248-04 Applies to the design, characteristics, construction, installation, dismantling, operation, inspection, testing, and maintenance of tower cranes.
 
I recently did an analysis for Oil Derrick stuctural work, they call out API 4F if I remember correctly. Might be a starting point.

Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
 
Do you have a copy of Shapiro"Cranes and Derricks"?;there should be an answer in that book as there is a whole section on tower cranes.
 
Status
Not open for further replies.
Back
Top