Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Design firm for transmission line

Status
Not open for further replies.

sparky1976

Electrical
Mar 12, 2001
87
0
0
US
Dear all,

Could you suggest me an engineering firm that specialize on designing transmission line, study on towers and insulators ?
world wide would be OK.

thanks
Pitat
 
Replies continue below

Recommended for you

SNC-Lavalin ATP Inc.
P.O. Box 2176, Station "M"
1035 Seventh Ave SW
Calgary, Alberta
Canada T2P 2M4

Tel: (403) 539-4550
Fax: (403) 539-4551


ATP was recently acquired by SNC Lavalin and consists of the former transmission line and substation design department of TransAlta Utilities. Depending on where you are located, the low value of the Canadian dollar could be to your advantage in lowering the cost of design services.
 
It depends in wich country you are and the voltage of the line you are interested to design, as well as if you want a complete design of the structures or only the shape and the load conditions, leaving the final calculation for the towers suppliers. You have to consider also if you wanto to include in the design the foundations or not. If you want more informatin please write me.
 
Check with your local electric utility (not sure which country you are in). Many electric utilities are competing for these type projects since they have the in-house skill (engineers, techs, surveyors, environmental, rates, regs, legal, etc.) and everyday contact with the "issues" of transmission lines.
 
Dear AKR,

You can try ECC- Larsen and Toubro's Engineering and Construction Division in Chennai India. You can forward a mail to kvrn@lntecc.com

ECC just completed a 132 kV D/C transmission line project of ours in Oman and they have a fabrication unit in Chennai.
They have supplied towers to outher foreign projects as well.

 
Status
Not open for further replies.
Back
Top