Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Design of 0-30V and 0-30A Power Supply 1
- Thread starter saaqib
- Start date
-
1
- #2
That's fine, but what help do you want?
Lots of things need to be answered:
Isolation of primary to secondary;
EMC regulations to be complied with;
Environmental requirements commercial/industrial/military/automotive?
Size, weight;
Target efficiency if this is an issue;
Type of control or man/machine interface: Manual, computer links - RS232 or Internet or what;
Transient performance;
Target cost;
Likely manufacturing quantities 1, 10, 100s or large;
Likely location of manufacture and availability of plant and equipment and labour;
Level of automation available to assist design and/or manufacture;
Why not just buy one?
Best regards
Lots of things need to be answered:
Isolation of primary to secondary;
EMC regulations to be complied with;
Environmental requirements commercial/industrial/military/automotive?
Size, weight;
Target efficiency if this is an issue;
Type of control or man/machine interface: Manual, computer links - RS232 or Internet or what;
Transient performance;
Target cost;
Likely manufacturing quantities 1, 10, 100s or large;
Likely location of manufacture and availability of plant and equipment and labour;
Level of automation available to assist design and/or manufacture;
Why not just buy one?
Best regards
- Status
Similar threads
- Question
- Locked
- Question