Detail View Border 1

[3dlogix]

Ever wanted to make a nice, round detail view border on the new view?

Well, you can by selecting the Grid ON, as Polar, and set Snap to Grid (Environment).
Now when you select to create a Detail view, place the Grid Origin at the Detail View center point, then create the detail view as before. But when you start making the spline outline, snap to the grid.

Voila, there is a nice Circular detail boundary on both the new view and Parent view.

Steve

http://www.3dlogix.com

 

[ttx]

Thanks Steve,
Perhaps you would consider a tip of he week? Most of us are very busy in our day to day work. I find that learning one or two "little-known" techniques about using Pro/E each week can be very beneficial. All those tips really can add up over the months!

cheers,

Jim W
Tactex Controls Inc.

 

[3dlogix]

Jim;

Thanks for the encouragement. I will try to get some more on line on a regular basis.

Steve

http://www.3dlogix.com

 

[proguy]

Yes..the more tips the better.. there are video tips of the week which cover a lot more stuff in full screen demonstrations with Pro/E. Try

http://www.proecentral.com

or there are a couple dozen free ones at

http://www.kinetivision.com

 

[prohow]

Also check the Pro/E & Intralink tips here:

http://www.geocities.com/edwinmuirhead/pro-how/

Recent examples:
- Create features based on graphs
- Mapkeys
- Enable part to calculate its weight
- ModelCheck

Updated every couple of weeks.

Regards
Ed

 

[npsingh]

Appreciation are coming for good tips. Why don't people mark is as helpful post. It is located at left corner below the post.
Thanks N P Singh