Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Determine Design Side of Part

Status
Not open for further replies.
JCWarrior

JCWarrior

Automotive
Jan 17, 2012
1
Does anyone know the verbiage for the standard/guideline for determining/defining the design side of a part? (vs stating the "side that holds water").

Thanks.
 
Status
Not open for further replies.

Similar threads

A
  • Question
Macro to search a part in DESK window of Catia
Replies
6
Views
3K
amitm003
A
N
  • Question
Part mass and CG 1
Replies
4
Views
5K
nicsachal
N
Eisengrindt
  • Locked
  • Question
Creating a pad on inclined side surfaces
Replies
2
Views
337
Wuzhee
Wuzhee
A
  • Question
CATIA Macro to insert product/part without link 1
Replies
2
Views
2K
AbhishekChavan
A
CarlosR2022
  • Locked
  • Question
How to find the position matrix of a snapped part in 3Dx?
Replies
2
Views
372
CarlosR2022
CarlosR2022

Part and Inventory Search

Sponsor

Back
Top Bottom