schurilov
Civil/Environmental
- Nov 1, 2005
- 5
I am curios how one can obtain Status Parameters in DIANA FEA (v10.5) with the graphical user interface?
The Chapter 95 from the user manual states "The post-analysis result STATUS is used in Diana to output the internal state parameters of the material model at the integration points of an element, for instance the cracks, the plastic points, etc.".
I am particularly interested in Chapter 95.2 Crack Status.
Thank you
The Chapter 95 from the user manual states "The post-analysis result STATUS is used in Diana to output the internal state parameters of the material model at the integration points of an element, for instance the cracks, the plastic points, etc.".
I am particularly interested in Chapter 95.2 Crack Status.
Thank you