Apr 8, 2019 #1 aleksandar81 Mechanical Jul 2, 2014 137 Can I dimension diameter of this revolved section? https://files.engineering.com/getfile.aspx?folder=1f818380-db43-4e65-810d-ddbc60c2fec8&file=Untitled.png
Apr 10, 2019 #2 jackk Mechanical Nov 22, 2002 1,306 I think you need to add a centerline first. Then dimension from the centerline to the edge for the radius. And use the LEADER option to change it from Radius to Diameter. Maybe there's a better way? Upvote 0 Downvote
I think you need to add a centerline first. Then dimension from the centerline to the edge for the radius. And use the LEADER option to change it from Radius to Diameter. Maybe there's a better way?
Apr 11, 2019 Thread starter #3 aleksandar81 Mechanical Jul 2, 2014 137 Can't do that, it doesn't allow me to do that.Check the pic. https://files.engineering.com/getfile.aspx?folder=1b61d7e8-353f-4cac-a226-b40cef0a59da&file=Untitled.png Upvote 0 Downvote
Apr 11, 2019 #4 CheckerHater Mechanical Sep 22, 2009 2,877 While your dimension is still highlighted, go into "leaders" tab and change "radius" to "diameter" "For every expert there is an equal and opposite expert" Arthur C. Clarke Profiles of the future Upvote 0 Downvote
While your dimension is still highlighted, go into "leaders" tab and change "radius" to "diameter" "For every expert there is an equal and opposite expert" Arthur C. Clarke Profiles of the future
