Dimensioning

[wlobb]

I'm using WF 4 and for some reason it will not let me change the tolerance mode in the drawing, and thus I cannot include a bilateral dimension. I have no problem doing this in WF 3, so I am confused. Is there something I have to do to take care of this?

Thanks,
Winson

 

[shushaim]

Even though it's been a while since you've posted your question, here is something you should try:
from the main toolbar click
File --> Properties --> Drawing Options
in the option windoe type: tol_display
change value to "yes" --> Add/Change --> OK
Now you should see tolerancing on all of your dimensions and the option to change tolerancing scheme should be available.

 

[cgelang]

Shushaim is right, after you set what he said, when you go back to the dimension you can now set the type of tolerance you want under tolerance mode.

Cheers.