Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dimensions lines too close 2

Status
Not open for further replies.

Travh2008

Mechanical
Aug 20, 2012
18
Hello,

I am adding dimensions to a drafting part, and some dimensions lines are too close, causing the text to overlap. I thought I could just click the dimension value and drag it to the side, but only some dimensions allow this. I've added a screenshot of my problem.

How can I fix this problem?

Thanks
 
Replies continue below

Recommended for you

These appear to be Ordinate Dimensions. If so, try selecting the interferring dimensions, press MB3 and select the 'Style' option. You should be in the 'Ordinate' tab or the 'Edit Dimension' dialog. If so, change the 'Dogleg' option from 'No' to 'Yes' (by selecting the corresponding icons below the word 'Dogleg') and then hitting OK.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
Try drag the dimension while pressing the Shift key. It should enable a dogleg.
 
The dogleg works perfectly.

Thanks guys,
Travis
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor