Sep 24, 2007 #1 Nuno28 Aerospace Mar 21, 2007 11 How can planes be displayed in drawings? Thanks in advance.
Sep 24, 2007 #2 Azrael Automotive May 12, 2003 685 I don't think they can, why do you need them on the drawing? Upvote 0 Downvote
Sep 24, 2007 Thread starter #3 Nuno28 Aerospace Mar 21, 2007 11 I am using planes as datums. I would like to avoid drafting in the planes in order to try to keep the manager tree as clean as possible. Upvote 0 Downvote
I am using planes as datums. I would like to avoid drafting in the planes in order to try to keep the manager tree as clean as possible.
Sep 24, 2007 #4 itsmyjob Mechanical Apr 11, 2002 2,375 planes are infinite, and like infinite line in sketcher they will not project in 3d. Unless you ask Dassault to improve this Eric N. indocti discant et ament meminisse periti Upvote 0 Downvote
planes are infinite, and like infinite line in sketcher they will not project in 3d. Unless you ask Dassault to improve this Eric N. indocti discant et ament meminisse periti
Sep 24, 2007 #5 Azrael Automotive May 12, 2003 685 U could use an axis system instead, just pick it before the reference plane Upvote 0 Downvote
Sep 24, 2007 #6 Azrael Automotive May 12, 2003 685 You can actually make a measurement against a plane but that is with the FTA, and in 3D. Upvote 0 Downvote
Sep 24, 2007 #7 ferdo Mechanical Jul 4, 2002 2,843 Hi, Line on plane, projected in drawing... Regards Fernando Upvote 0 Downvote
