Jun 26, 2011 #1 Rajeev7 Marine/Ocean Jun 26, 2011 3 Hello, Is there minimum distance limitation between two weld joints as per ASME B31.3.
Jun 26, 2011 #2 gr2vessels Mechanical Sep 29, 2004 1,971 The code doesn't specify a minimum distance, as this is a welding requirement to prevent overlap of the HAZ. Typical Client specification require a gap of 2t or 40 mm, whichever is smaller. gr2vessels Upvote 0 Downvote
The code doesn't specify a minimum distance, as this is a welding requirement to prevent overlap of the HAZ. Typical Client specification require a gap of 2t or 40 mm, whichever is smaller. gr2vessels
Jun 27, 2011 Thread starter #3 Rajeev7 Marine/Ocean Jun 26, 2011 3 Thank you very much for the advise. Upvote 0 Downvote
Jun 27, 2011 #4 SJones Petroleum Apr 22, 2001 3,899 http://www.eng-tips.com/search.cfm?pid=0&action=Search&q=distance+between+welds Steve Jones Materials & Corrosion Engineer http://www.linkedin.com/pub/8/83b/b04 Upvote 0 Downvote
http://www.eng-tips.com/search.cfm?pid=0&action=Search&q=distance+between+welds Steve Jones Materials & Corrosion Engineer http://www.linkedin.com/pub/8/83b/b04
