Dodgy behaviour of a detail view 1

[SiW979]

Hello NX users.

One of my users has a drawing with a number of detail views on it. When has come to add another, it is not adding a dashed line round the edge of the view thus the drawing doesn't look right. It will also not allow him to draw another circle inside when he expands the view what-so-ever. I have tried all the usual settings and preferences but to no avail. Any idea would be appreciated.

Best regards

Simon NX4.0.4.2 MP10 - TCEng 9.1.3.6.c - (NX6.0.3.6 MP2 native)

http://www.jcb.com

Life shouldn't be measured by the number of breaths you take, but by the number of times when it's taken away...

 

[bboy68]

hi

1- Verify the options
preferences-->view-->detail tou have the preference for the line boundray detail

2- look your work layer and go to format-->visible in view aan select the view and verify the layer is visible

 

[SiW979]

Thanks for that, sometimes I can be such a numpty. I'll put it down to Monday morning post weekend traumatic stress disorder.



Best regards

Simon NX4.0.4.2 MP10 - TCEng 9.1.3.6.c - (NX6.0.3.6 MP2 native)

http://www.jcb.com

Life shouldn't be measured by the number of breaths you take, but by the number of times when it's taken away...

 

[bboy68]

no problem I understand you