May 9, 2003 #1 daveatpressac Mechanical May 9, 2003 1 does any body know how you import a reference image (jpg or bmp) into AutoCad, so that it can be used as a guide for creating the drawing. Thanks
does any body know how you import a reference image (jpg or bmp) into AutoCad, so that it can be used as a guide for creating the drawing. Thanks
May 9, 2003 #2 naujoke Mechanical Mar 10, 2003 24 Hi, I think you can resize or scale a raster image only. If you need use snaping to image's objects, imported *.wmf lets to do it. Upvote 0 Downvote
Hi, I think you can resize or scale a raster image only. If you need use snaping to image's objects, imported *.wmf lets to do it.
May 9, 2003 #3 borgunit Mechanical Jul 26, 2002 1,153 If you just need the basics of importing, go to INSERT >> RASTER IMAGE or you can do a copy and paste into your drawing. You can then rescale the image to the size you need. Upvote 0 Downvote
If you just need the basics of importing, go to INSERT >> RASTER IMAGE or you can do a copy and paste into your drawing. You can then rescale the image to the size you need.
May 9, 2003 #4 rKeyTek Computer Nov 18, 2002 148 Dude, BorgUnit is right ... Just to add to that note ... Make sure ... imageframe=on If this is off, you won't be able to manipulate the iamge. Hope that helps. Upvote 0 Downvote
Dude, BorgUnit is right ... Just to add to that note ... Make sure ... imageframe=on If this is off, you won't be able to manipulate the iamge. Hope that helps.
![[wink]](/data/assets/smilies/wink.gif "[wink] [wink]")
![[spin]](/data/assets/smilies/spin.gif "[spin] [spin]")
![[angel]](/data/assets/smilies/angel.gif "[angel] [angel]")
