don't find ifort.exe when abaqus run the job

[21did21]

Hello world,

i have a job with a subroutine, when i run the job abaqus say:
"Error in job AAA: Problem during compilation - ifort.exe not found in PATH."

i have search in this forum and i find this solution:
"Assuming you have administrator rights:
My Computer->Properties->Advanced->Environment Variables:
-in the "System variables" list locate "Path" variable
->Edit-> add the path to the folder were the "ifort.exe" has been installed. (e.g. "C:\Program Filed\....\BIN")
You need to separate the new path with a ";" from the other paths.
->OK->OK->Apply->OK"

but i have try this with this path:
E:\Program Files\Intel\Compiler\11.1\048\bin
and it don't work

do you say how i can resolve this problem ?

 

[cvhar87]

What version of Abaqus are you using? Check whether the version you are using is compatible with fortran 11.

This was the procedure I followed when I installed:

http://www.srcf.ucam.org/~rgl27/Academic/Ph.D/ABAQUS/UserSubConfigureInfo.html

Cheers,
Vish

 

[21did21]

thank you a lot for your answer and the link.

i use the 6.9.3 version

 

[21did21]

no, i don't understand how i can have the good version of fortran and where i can download this software...

 

[MechIrl]

Last time I checked it is possible to get older versions of the intel fortran compilers from their website if you've already purchased a newer one. You might find a compatible version for abaqus 6.9 on there.

 

[21did21]

thank you
there is no free compilator equivalent with interl fortran ?

 

[Timusop]

21did21, you will find enough challenges using Intel Fortran with Abaqus, let alone using another free equivalent of Intel Fortran. Try to get Intel Fortran if you can. All the best.

 

[21did21]

thanks for your help and your advice