Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Drains

Status
Not open for further replies.

ContractorDave

Mechanical
Jan 16, 2007
364
NFPA 13R 6.7.2.2 requires a minimum 1" drain
NFPA 13 Table 8.16.2.4.2 seems to allow for a minimum 3/4" drain (on mains up to 2"). Am I missing something?

Thx
Dave
 
Replies continue below

Recommended for you

Nope. Just the standard committee system for writing codes.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor