Draw a One compartment sink

[Carolus17]

Hello,
I'm new to Solid Edge ST4, I need to draw a "one compartment sink".
anyone have example or tutor how to draw the round corner ?
thank you.

 

[kjoiner]

Carolus,

Are you referring to the fillets on the sides and bottom of a sink? If so, use the round tool and pick the lines on the vertical sides and also the lines at the bottom. The rounds will intersect creating the rounded corners.

Kyle

 

[Carolus17]

humm...I do a quick check, i can't find the "round tool". I will try it again tonight,
Thank you so much.

 

[KENAT]

May be hidden under the chamfer button - I can't remember with the newer interface.

Posting guidelines faq731-376

http://eng-tips.com/market.cfm?

(probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484​

 

[kjoiner]

Yes, if you are running ST4, it will be in the Home tab in the Solids group. There is a command finder at the lower right of the screen as well. If you type in "round" it will highlight and flash the command in the tool bar. It's great for new users, but I have used it several times myself while getting used to the new interface.

Kyle