Drawing issue

[sandy JA]

Hi all
Good Day!

I have one issue with my colleague system.
When opening a new file command
Drawing tab is not visible for him.
Attached the image for reference with drawing tab.

 

[Dave K]

Is the drawing pax file in the correct location for him?

-Dave

NX 9, Teamcenter 10

 

[sandy JA]

Can you let me know the exact pax filename. There are too many pax files.

 

[cowski]

Open your NX log file (menu -> help -> log file) and search for "pax" to see what pax files NX is loading (or attempting to load). Compare your log file to his and note any differences in pax file locations.

If you want everyone to access the same pax file, it will need to be saved in a network location where everyone has access and you'll need to point NX to that location so the files are loaded upon startup.

www.nxjournaling.com

 

[Dave K]

.pax file name can vary, depending on if you are running NX native or managed (teamcenter). Name can also be customized, as we have different .pax files for different locations.

-Dave

NX 9, Teamcenter 10