Atarek
Electrical
- Apr 16, 2017
- 27
Hi everyone,
I have a design challenge here, and i hope someone can help me,
I need to develop a mechanical solution that provide drilling protection of an enclosure,
knowing that i have a constraints in the thickness of the material, to be 2mm max.
I suggested to increase the hardness of a steel enclosure, but i'm not sure,
Is there any method that will assure that not drill will be able to penetrate any further, maybe some kind of trap that will hold the motor from rotating,
Thanks in advance,
ATarek
I have a design challenge here, and i hope someone can help me,
I need to develop a mechanical solution that provide drilling protection of an enclosure,
knowing that i have a constraints in the thickness of the material, to be 2mm max.
I suggested to increase the hardness of a steel enclosure, but i'm not sure,
Is there any method that will assure that not drill will be able to penetrate any further, maybe some kind of trap that will hold the motor from rotating,
Thanks in advance,
ATarek