Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ductile fracture initiated by crack
- Thread starter Eleo
- Start date
Michael279
Aerospace
I'm not sure what you mean with XFEM.
But it is possible to model crack initiatiation and propagation. However I only a method for this when you use layers in your model, in such a way that the damage can only grow through the boundaries of the layers.
For instance by using layers modelled as seperate parts with cohesive elements inbetween. Alternatively you can use cohesive surface interaction.
I think you can apply the traction separation law both with cohesive elements and the cohesive surface interaction.
But it is possible to model crack initiatiation and propagation. However I only a method for this when you use layers in your model, in such a way that the damage can only grow through the boundaries of the layers.
For instance by using layers modelled as seperate parts with cohesive elements inbetween. Alternatively you can use cohesive surface interaction.
I think you can apply the traction separation law both with cohesive elements and the cohesive surface interaction.
- Status
Similar threads
- Locked
- Question
- Locked
- Question