igorsc
Mechanical
- Feb 6, 2011
- 1
Hello,
I have a model with periodic boundary conditions (circular frequency = 471.24 rad/s). I'm using this dynamic implicit step, but there is always an error in my simulation.
The erros are:
-too many attempts made for this increment, or
-the increment required is less than the minimum specified
So, I think my problem is that i'm chossing wrong values for these parameters.
How I can choose a correct value for the time period from this step? what that value means and what I have to consider to choose this value?
I don't know too how to choose the maximum number of increments.
Thank you for your help.
Igor
I have a model with periodic boundary conditions (circular frequency = 471.24 rad/s). I'm using this dynamic implicit step, but there is always an error in my simulation.
The erros are:
-too many attempts made for this increment, or
-the increment required is less than the minimum specified
So, I think my problem is that i'm chossing wrong values for these parameters.
How I can choose a correct value for the time period from this step? what that value means and what I have to consider to choose this value?
I don't know too how to choose the maximum number of increments.
Thank you for your help.
Igor