Dynamic Sketch Drag

[KLineDesign]

Hello All,

A user here has a setting incorrect that I can't track down. It could be a computer graphics issue, but when editing a sketch any drag operations do not dynamically display. They instead wait until you release MB1. What gives?

KLINE

 

[JohnRBaker]

Make sure you're using a Siemens CERTIFIED graphics driver.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[jerry1423]

. . . and here are some previous threads, pertaining to graphics drivers, that may help you:

http://www.eng-tips.com/viewthread.cfm?qid=186873

http://www.eng-tips.com/viewthread.cfm?qid=118207

 

[KLineDesign]

That appears to be it...I've requested a Card Change for him. Funny that everything else seems perfect? Do you know of any other areas of graphics concern where I could test his card to know it is inadequate (in case others ask me the same)?

Happy Thanksgiving,
KLINE

 

[cowski]

Is the card itself not certified?
It may not be the card, but just the driver version.