Easy viton adhesive question

[floattuber]

What kind of adhesive do I use to glue a viton Fluoroelastomer seal to stainless steel?

We're making a thermal chamber door and we cannot use any silicone so RTV is out. Temperatures range from -80F to +250F. Air pressure is room pressure.

This is the seal we're using;

http://www.mcmaster.com/#2072t12/=6ceudv

Ideally, I'd like to use an off the shelf adhesive from mcmaster or grainger etc. I need to order it in fast.

 

[floattuber]

I guess it's not as easy as I thought! Makes me feel better.

 

[kevindurette]

Do you have the luxury of trying a shot in the dark? O-ring cord is often joined with an industrial-strength super glue.

 

[floattuber]

Superglue did enter my mind but I didn't know if it would outgas (which is bad in this industry) and I didn't know how long it would last.

At any rate, we ended up rivoting the seal to the oven door.

 

[tom1953]

Maybe an adhesive like Rema SC-2000, from Rema Tip Tip (

http://www.rema.com/cold_adhesive/REMA SC-2000 Spec Tech Sheet (2-9-99).pdf)

would work.

tom