Jun 17, 2005 #1 bosse1950 Industrial May 19, 2005 20 0 0 TT I am looking for a design / drawing program for combined electrical / plc control panels, any help will be greatly appreciated
I am looking for a design / drawing program for combined electrical / plc control panels, any help will be greatly appreciated
Jun 19, 2005 #2 CMfgE1 Mechanical Mar 15, 2005 57 0 0 US AutoCad Electrical should do the trick. http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=4255921 There are lots of programs to do this with. Some more specific than others. Pro-E, Solid Works, AutoCad, CadKey. There are so many programs is comes down to a matter of finance. Good Luck! Quote: "Its not what you know, its who you know" - anybody trying to find a decent job Upvote 0 Downvote
AutoCad Electrical should do the trick. http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=4255921 There are lots of programs to do this with. Some more specific than others. Pro-E, Solid Works, AutoCad, CadKey. There are so many programs is comes down to a matter of finance. Good Luck! Quote: "Its not what you know, its who you know" - anybody trying to find a decent job
Jun 26, 2005 #3 ilan7 Mechanical Jun 10, 2003 152 0 0 IL Try AutoPlan from Bentley (used to be Rebis) At: http://www.bentley.com/en-US/Products/AutoPLANT+PID/Overview.htm The program works with the plant P&ID and help create the wiring, PLC moduls, etc. Upvote 0 Downvote
Try AutoPlan from Bentley (used to be Rebis) At: http://www.bentley.com/en-US/Products/AutoPLANT+PID/Overview.htm The program works with the plant P&ID and help create the wiring, PLC moduls, etc.