Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Electrode for casing API 5CT J55

Status
Not open for further replies.
elfares1

elfares1

Petroleum
Oct 5, 2012
6
..Hi, I need to know suitable electrode in order to weld seamless casing steel and tubing, API 5CT J55
thanks a lot
 
Replies continue below

Recommended for you

Sort by date Sort by votes
What kind of welding and welding process are you intending to use? API 5CT J55 is a low alloy steel material specification. Most likely you will need to use a low alloy filler metal or electrode to achieve the desired minimum yield strength properties and ultimate tensile strength properties.

I would suggest qualification of a welding procedure once you select the welding process or processes.
 
Upvote 0 Downvote
API 5 CT did not intend casing and tubing to be welded .If you weld these products they no longer meet spec.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Johnwoo1991
  • Locked
  • Question
Alloy 718 - Api 6a cra / B637 - ams)
Replies
3
Views
276
EdStainless
EdStainless
hirschaplin
  • Locked
  • Question
Material selection for API 619 rotors
Replies
1
Views
124
hirschaplin
hirschaplin
G
  • Question
Stainless Steel for ASME BPVC VIII
Replies
3
Views
3K
Andy Mayfield
A
Johnwoo1991
  • Question
F9 and F91 steel for low temp
Replies
1
Views
984
EdStainless
EdStainless
hirschaplin
  • Locked
  • Question
Compressor casing in Spheroidal graphite cast iron and impact testing
Replies
2
Views
163
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom