I have a solenoid electromagnet whose cylindrical steel core protrudes out and has a chamfer at the end. When the core end contacts the mating part, the chamfer reduces the actual contact area by 1/2 (compared to the core diameter). I know pull force is dependent on core diameter, but is it dependent on the diameter of the contact area or of the core diameter within the solenoid? If I remove the chamfer (so that the contact diameter is the same as the core diameter, doubling the contact area) will I nearly double my pull force?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Electromagnet contact area vs. force
- Thread starter cativo
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
