Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EN 13445: tubesheet integral with hub from plate - Allowed?

Status
Not open for further replies.
FPPE

FPPE

Mechanical
Mar 4, 2022
194
Hi,

Is it possible to use (for a EN 13445 project) an integral tubesheet with hub from plate (es. EN 10028-3 P355 NH) without no test on hub?
For example ASME requires the tension test specimens on hub region.

Thank you
 
Status
Not open for further replies.

Similar threads

ElCidCampeador
  • Question
Creep design - EN 13445
Replies
2
Views
4K
ElCidCampeador
ElCidCampeador
Klara.Sophi
  • Question
Required burst pressure in EN 13445-3:2021
Replies
1
Views
458
Klara.Sophi
Klara.Sophi
mrmalcolm
  • Locked
  • Question
Toughness required by the EN 13445
Replies
0
Views
291
mrmalcolm
mrmalcolm
FPPE
  • Question
Applicability of SA-788 S12 for SA-182 F316 HUBBED TUBESHEET
Replies
0
Views
1K
FPPE
FPPE
M L Kuselan
  • Locked
  • Question
PV Elite design Hub Type Self Reinforced Nozzle (SRN) with LIP
Replies
2
Views
1K
M L Kuselan
M L Kuselan

Part and Inventory Search

Sponsor

Back
Top Bottom