We have an unprotected dishcarge point from our power plant's cooling pond. It is possible that swimmers can come near it and we need to decide how to protect against someone becoming trapped in the flow of water. We are considering either a cage around the discharge or just floating barriers with warning signs. At it's smallest point the pipe (which starts at the bottom of the pond, about 5 ft below the surface) is 70" diameter and the flow rate is about 1 m3/s. Therefore, the average flow speed is 1.3 ft/s. How fast of water flow would be enough to trap a person?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Entrapment in cooling pond discharge
- Thread starter Andy22
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question