Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

envelope and concomitant forces

Status
Not open for further replies.

borja1980

Civil/Environmental
Feb 26, 2015
19
hi. i am working with sap2000, and i am teiying to develop and application for the automatic calculation of the reinforcements requiremnst of a concrete structure. i already know how to obtain the envelope of different load cases, but i need to be able to obtain the concomitant forces in a given point. i mean, when i calculate the envelope of the bending moment, i know the max and min value of the bending momennt in every pointin the structure, but i need also to obtain the axial force associated in that particular point, with the given bendin moment. i would like to know if somebody knows how to do it.
thanks
 
Replies continue below

Recommended for you

I don't think it is possible but you might be missing something. Sometimes the maximum and corresponding values might not be of such importance: imagine a case in which you have a maximum value for one of the force/moment but the corresponding value of the other is small. There might be a case in which you might not have maximum values but the combination of both may give the biggest reinforcement area required. I advice you to get all these case results listed in MS Excel (for example) and use some formulas to calculate the required reinforcement in every case and then consider the biggest reinforcement required.
 
Hi,

You can get the concomitant forces in version 17, display tables>options

Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor