Error in finding connector element result please help

[VikashMehta]

I am getting displacement and force both zero. I am attaching .cae file please have a look where i am making mistakes.

https://www.dropbox.com/s/it3rkmfd31bk0k3/25mmMS.cae

https://www.dropbox.com/s/buz5ar62z6faf26/25mmMS.jnl

Thanks

 

[akabarten]

Hi,

Your connector outputs are zero because the connector element is connected nowhere and has zero deformation.

Regards,
Bartosz

 

[VikashMehta]

Thanks for reply @ Bartosz
My connector element is on wire(wire-1-set-1) which is connected to reference point RP-1100 and RP-22. You can check connector assignment.

Regards
Vikash

 

[VikashMehta]

@ Bartosz
Please have a look on Job-mild-12
Thanks

 

[VikashMehta]

@ Bartosz
Sorry Not Job-mild-12, it is Job-mild-11

 

[IceBreakerSours]

Check the documentation for a sample input file for the type of connector you are using and then compare it with the connector definition in the INP generated by your CAE file.

Are you new to this forum? If so, please read these FAQ:

http://www.eng-tips.com/faqs.cfm?fid=376

http://www.eng-tips.com/faqs.cfm?fid=1083