Error Isogen of Cadworx

[Cronos_2P]

Hi everyone,

I am trying to generate isometric plans in Cadworx Plant 2018, I already have my isos folder configured, but when I execute the IGO or IGB command, I get the following error: Error opening file for write (1) File: C:\WINDOWS\system32\isogen.log.

and I don't know how to solve it.

I hope you can help me.
In advance thank you very much for the help.

 

[CarlB]

Maybe this:

http://forums.coade.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=72538

 

[Cronos_2P]

Thank you very much for your help Carlos, it is not clear to me how to solve the error, I cannot understand what option you mean by saying that it should not be blank.

 

[CarlB]

I don't have Cadworx to check, I just found that someone posted how they had solved it..
From that response, it appears there is a menu "Option" "Start In" that must not be blank. They used "c:\cadworx 2018\". You would enter path where yours is installed.

If that doesn't do it, search and/or post question on forum

http://forums.coade.com/ubbthreads/

 

[Cronos_2P]

Thank you very much for the help CarlB, so I will