error using GM test and checkmate

[rdln]

We just had the latest GM toolkit update and now we cant pass checkmate due to a "IS LAST FEATURE CURRENT" error when there arent any features in the file (assembly)and also happens in files with any amount of features with the last one current.

Rebooted, happens to any file, native or Tc,....

TC version: tc8.3.1.g6

toolkit: GPDL 7-A.6.1

Test: global quality seal

 

[JohnRBaker]

You will need to follow-up with your contact at GM, from whom you received the GM Toolkit, for support of this nature.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[rdln]

Yes, John that is an option but I would rather try the community first.

 

[JohnRBaker]

But in THIS particular instance the 'community' is not raally an appropriate source of support since the use of the GM Toolkit is under the strict control of GM and their people who are responsible for supplier relationships. They're responsible for determining if these problems are due to the Siemens PLM tools used to create the GM Toolkit or the tests/routines written by GM themselves, but in either case, they should be the ones to follow-up with a solution, either by making changes themselves or by working with Siemens PLM to get it resolved.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.