Error while opening big assembly..

[ArvindHalashi]

Hello All,

When I was trying to load assembly I got an below error. Can anyone please advise me what could be reason??

"Error recovery completed for the following error: Standard C++ exception caught. See system log for details"

Thanks a lot!

Regards,

Arvind
Mechanical Engineer

UG 7.5.5.4 & TC 8.3

"People can take everything from you except luck"

 

[NXLars]

Hi,

Attaching your system log (the end of it) to your question would really help us to find your problem.
Start by attaching the last 30 lines of the log. Then we'll see what we can do for you.

/Lars

 

[JohnRBaker]

Or you can contact GTAC and have them look at your syslog.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[ArvindHalashi]

Thanks NXLars and John. I will contact GTAC.

Regards,

Arvind
Mechanical Engineer

UG 7.5.5.4 & TC 8.3

"People can take everything from you except luck"

 

[ChaseWichert]

I have this same error and no one knows what the problem is. It is only on my machine, GTAC doesn't know yet they are working on it. In the log it happens when it is updating components.

 

[ChaseWichert]

Sorry 7.5.5.4 It seemed to start happening right after a Windows Update install. However no one else is having this problem.

 

[ChaseWichert]

&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item
&MACRO EVENT FOCUS_IN 0 0, 6619136, 0, 0, 0! Maintain
&MACRO ASK_ITEM 6619136 (1 OPTM 0) = 0  ! Maintain
&MACRO OK 0 0 ! OK Callback  
&MACRO ASK_ITEM 3735552 (1 LIST 0) = 1  ! List
&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item
&MACRO ASK_ITEM 1376256 (1 BOOL 0) = 1  ! Part
&MACRO ASK_ITEM 1376256 (1 BOOL 0) = 0  ! Part
&MACRO ASK_ITEM 3735552 (1 LIST 0) = 1  ! List
&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item

NX Load Options Are :-
    Load Options      : Load from directory
    Load Latest       : Find exact version of partnames
    Load Components   : Load all the component parts
    Failure Option    : Do not abort load on failure
    Load Fully        : Fully load all the component parts
    Representations   : Do not use lightweight
    Load Substitution : Do not allow substitutions on load
    Reference Sets    : As Saved, None, Empty, Use Model
                      : Do not apply to all levels
    Load Wave Data    : Fully load WAVE data
    Load Wave Parents  : All parents, and their parents, etc.
    Part family members : Regenerate missing members automatically
    C:\Users\cdwicher\Desktop\Western Energy - Rosebud\ce23838-0-nx.prt is on a ntfs filing system

Loading "C:\Users\cdwicher\Desktop\Western Energy - Rosebud\ce23838-0-nx.prt" which was saved in NX V7.5
  Read in all for part "C:\Users\cdwicher\Desktop\Western Energy - Rosebud\ce23838-0-nx.prt", cpu    0.250, real    0.116
Partition info: RM:1 (0.1, 0.0) CM:1 (0.0, 0.0) EXP:1 (0.0, 0.0) PATT:1 (0.0, 0.0) OCC:1 (0.0, 0.0) PSS:1 (0.0, 0.0) PST:2 (0.0, 0.0) KF:1 (0.0, 0.0) PSP:1 (0.0, 0.0) 
Loaded and updated part "C:\Users\cdwicher\Desktop\Western Energy - Rosebud\ce23838-0-nx.prt" cpu    0.250, real    0.119
Loaded and displayed "C:\Users\cdwicher\Desktop\Western Energy - Rosebud\ce23838-0-nx.prt": CPU time:   0.250 secs, Real time:  0.119 secs
**** Replace Component: Replacing an old unloaded instance 62448 with a new part C:\Users\cdwicher\Desktop\Western Energy - Rosebud\ce23838-0-nx.prt
*** EXCEPTION: Severe error  69 in line 195 of O:\ugnx755\ip4\src\syss\no\ind\Error_Severe.cxx at Mon Oct 29 07:26:36 2012 Pacific Daylight Time
+++ C++ std::exception caught: Specified license context does not exist or no longer has any licenses reserved against it.
Loaded module C:\Program Files\Common Files\microsoft shared\ink\tiptsf.dll 7fef2310000 7f000 58fcaa8a-405738a0-ea0fb093-a06fcd41-1 version = 6.1.7601.17514
[ 1] 07FEFDC9CACD                                                              (KERNELBASE)
[ 2] 00000151DE0D                                                              (libsyss)
[ 3] 00000154A030                                                              (libsyss)
[ 4] 00000154A520                                                              (libsyss)
[ 5] 00000154A7FC                                                              (libsyss)
[ 6] 00000154A92C                                                              (libsyss)
[ 7] 00001A2860EE                                                              (windowsui)
[ 8] 000074C64830                                                              (MSVCR90)
[ 9] 000074C33B3C                                                              (MSVCR90)
[10] 000077CE0C21                                                              (ntdll)
[11] 00001A20D1B7                                                              (windowsui)
[12] 00001A20D91B                                                              (windowsui)
[13] 000001B82682                                                              (libdisp)
[14] 000001B632F9                                                              (libdisp)
[15] 000001B63425                                                              (libdisp)
[16] 00000479FD1A                                                              (libpart)
[17] 0000047A3CB7                                                              (libpart)
[18] 0000047A41D6                                                              (libpart)
[19] 0000047A564A                                                              (libpart)
[20] 00000402A294                                                              (libocc)
[21] 0000022C10A8                                                              (libassy)
[22] 0000022C1FB8                                                              (libassy)
[23] 00000225722A                                                              (libassy)
[24] 00000225B2A6                                                              (libassy)
[25] 00000225BFB5                                                              (libassy)
[26] 00000220AA56                                                              (libassy)
[27] 0000045CD669                                                              (libpart)
[28] 0000047D45E8                                                              (libpart)
[29] 00004372A611                                                              (libuicompassy)
[30] 000019C210F0                                                              (libuifw)
[31] 0000165D03D4                                                              (libugui)
[32] 0000165D265B                                                              (libugui)
[33] 0000165D26F6                                                              (libugui)
[34] 0000165D290B                                                              (libugui)
[35] 00001668E097                                                              (libugui)
[36] 00001668E87C                                                              (libugui)
[37] 000019C28DDF                                                              (libuifw)
[38] 00001501C675                                                              (libassyint)
[39] 000016774060                                                              (libugui)
[40] 0000167740F7                                                              (libugui)
[41] 0000165F64BD                                                              (libugui)
[42] 00001A1CDC73                                                              (windowsui)
[43] 00001A1CDF83                                                              (windowsui)
[44] 0000165F67E0                                                              (libugui)
[45] 0000167B9A67                                                              (libugui)
[46] 000016774321                                                              (libugui)
[47] 00001486BD09                                                              (libuginitint)
[48] 000014864F9D                                                              (libuginitint)
[49] 0001400032E1                                                              (ugraf)
[50] 000140001F7B                                                              (ugraf)
[51] 000140006677                                                              (ugraf)
[52] 000077B8652D                                                              (kernel32)
[53] 000077CBC521                                                              (ntdll)
>>>> Severe error  69 caught in file ".\MTStatusBar.cpp" at line number 248
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\part\no\ind\update.c" at line number 8493
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\part\no\ind\update.c" at line number 8604
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\part\no\ind\update.c" at line number 7880
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\occ\no\ind\occ_ref_sets.c" at line number 4579
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\assy\no\ind\jax_component_assembly.c" at line number 1480
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\assy\no\ind\jax_component_assembly.c" at line number 1551
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\assy\no\ind\assy_interface.c" at line number 8406
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\assy\no\ind\assy_interface.c" at line number 8564
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\assy\no\ind\AssyJA_ReplaceComponentBuilder.cxx" at line number 354
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\assy\no\ind\AssyJA_ReplaceComponentBuilder.cxx" at line number 446
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\drv\part\no\ind\ja_builder_jam.cxx" at line number 108
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\uicompassy\no\ind\AssyUI_ReplaceComponent.cxx" at line number 908
>>>> Severe error  69 caught in file "O:\ugnx755\ip4\src\uifw\no\ind\uifw_definitions.c" at line number 1957
&MACRO MESSAGE_BOX -2, Standard C++ exception caught. See system log for details
&MACRO ASK_ITEM 3735552 (1 LIST 0) = 1  ! List
&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item
&MACRO ASK_ITEM 3735552 (1 LIST 0) = 1  ! List
&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item
&MACRO ASK_ITEM 3735552 (1 LIST 0) = 1  ! List
&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item
&MACRO EVENT FOCUS_IN 0 0, 6619136, 0, 0, 0! Maintain
&MACRO ASK_ITEM 6619136 (1 OPTM 0) = 0  ! Maintain
&MACRO ASK_ITEM 3735552 (1 LIST 0) = 1  ! List
&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item
&MACRO ASK_ITEM 1376256 (1 BOOL 0) = 0  ! Part
&MACRO ASK_ITEM 1376256 (1 BOOL 0) = 1  ! Part
&MACRO ASK_ITEM 3735552 (1 LIST 0) = 1  ! List
&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item
&MACRO ASK_ITEM 3735552 (1 LIST 0) = 1  ! List
&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item
&MACRO ASK_ITEM 3735552 (1 LIST 0) = 1  ! List
&MACRO      POSITION = 0 "ce23838-0-nx.prt" ! Index/contents of selected item
&MACRO EVENT FOCUS_IN 0 0, 6619136, 0, 0, 0! Maintain
&MACRO ASK_ITEM 6619136 (1 OPTM 0) = 0  ! Maintain
&MACRO CANCEL 0 0 ! Cancel Callback
&MACRO DIALOG_END -3, 0 ! Replace Component: CANCEL
UNDO_UG_delete_mark: Mark 91 (Unspecified) not found
&MACRO MENU, 0, UG_HELP_SYSTEM_LOG UG_GATEWAY_MAIN_MENUBAR ! <MB/Toolbar>

 

I'm getting the same error and no none can figure out the issue. And it seems to only happen with assemblies. Has anyone figured out the problem?
Could be Windows 7??

 

[MickyV007]

Is the O:\... disk a network share? Otherwise try to add this share to your trusted locations in Win7.

Best regards,

Michaël.

NX7.5.4.4 + TC Unified 8.3
Win 7 64 bit (Intel(R) Xeon(R) CPU X5650 @2.67GHz)
24.0 GB
NVIDIA Quadro 4000 + NVIDIA Tesla C2050

 

[Toost]

The logfile posted by ChaseWichert contains the line:
"exception caught: Specified license context does not exist or no longer has any licenses reserved against it."

Have you checked the FlexLM logfile ?

I.e, have NX produce the crash, then find the Flexlm logfile and read last lines.
I.e the local computer The NX session communicates with a license server somewhere, In the NX logfile one will find a line similar to :
UGS_LICENSE_SERVER 28000@computername_xxx
Then the Flexlm server runs on the "computername_xxx", open a window to that computer and search for *ugs*.log
( Before NX8.5 the logfile was default named "ugslicensing.log" and from NX8.5 it's named "splm_ugslmd.log")

And, Btw, the "advanced Assemblies" license can sometimes be a little tricky since one can create objects in assemblies that requires ( required ?) that license when the part is opened.

Regards,
Tomas

 

[NX123]

I have this same error and no one knows what the problem is. It is only on my machine, GTAC doesn't know yet they are working on it. In the log it happens when it is updating components.

Have you gotten any feedback on how to solve your problem and/or what actually causes it?

I am struggling with the same problem myself, but in addition I can't use the Stress Wizard (another C++ problem).

 

[DavidQ]

Hello Eng-Tips
I get the same error while trying to Create a New Component from an assembly file but Not from a part file. I notice that enable "Delete Original Objects" on Settings, trigger the error and one more thing, this happens on a specific assembly file. I guess I will use some tricks to workaround this error on that file.

Best regards

 

[jpetach]

This error can occur when a spaceball is attached and Office 2007 is installed. (In this particular case workstations with the spaceball that did not have MS office installed did not encounter the error). The error occurred (or did not occur) when plugging or unplugging the spaceball. There may be other situations that can cause the error message.

Hopefully this information may be helpful,

Joe

 

[MickyV007]

I can confirm what jpetach stated. I have a spacepilot pro and did an update of the software a month ago, suddenly i got the same error and had to shut down NX trough task manager. Un-install of the drivers and software was initially not working, so I had to remove all the reg keys and sub keys that had 3DConnexion references in it, manually. Then installed an older driver (from 2011) which was still on our servers (thanks sys admin!) and got the whole thing working again.
Updating software and drivers is recommended but sometimes it can go wrong.

Best regards,

Michaël.

NX7.5.4.4 + TC Unified 8.3
Win 7 64 bit (Intel(R) Xeon(R) CPU X5650 @2.67GHz)
24.0 GB
NVIDIA Quadro 4000 + NVIDIA Tesla C2050

 

[scotty7]

What version of spacepilot driver was installed when the issue appeared? I had 3.16.3 installed on my client a few days ago, and ever since, it has been throwing just these errors, whilst running Process Studio and separately a Visual Basic routine. Clients without the new driver run the same executable just fine.

 

[SDETERS]

I have issues with the 3.16.3 driver also. We had to go back to the driver 3.15.6. We had so many issues with the 3.16.3 driver.