EUROPEAN UPN SECTION CHANNELS 1

[besomdave]

MY OFFICE IS CURRENTLY TRYING TO CREATE STANDARD SYMBOLS
FOR AUTOCAD AND THE UPN SECTIONS AND WE NEED A LITTLE HELP:

CAN ANY ONE PROVIDE ME WITH THE INTERNAL FLANGE ANGLE(S)
FOR EUROPEAN UPN SECTION CHANNELS? - IVE TRIED SEVERAL SOURCES WHICH HAVE ALL DIMS EXCEPT THE ANGLE.

 

[prex]

Look at the site below under Beams->Sections->Channels prex
motori@xcalcsREMOVE.com

http://www.xcalcs.com

Online tools for structural design

 

[JSJ]

The internal slope of the flanges of the UPN is 8%, as shown in my catalogue.
FYI, the flanges of the IPN is 14%.

Hope this helps.

 

[besomdave]

MANY THANKS JSJ & PREX.

JSJ, WOULD YOU CONTACT ME BY E-MAIL(BELOW) - I WOULD LIKE A COPY OF YOUR CATALOGUE.

THANKS

wilsondave@pbworld.com