excute grip program using gripbatch command

[aek16]

Hi, I'm trying to execute a grip program using Windows Command prompt

I succeeded to compile and link the .grs file ( gripbatch -c <filespec> and gripbatch -l <filespec>)
but when it comes to excuting ( ripbatch -r <filespec> ) a window opens and closes immediately !!!!!


Do any of you have an idea how it works ?

Thank you.

 

[aek16]

Any one can help ?????

 

[markrief]

The NX Documentation and the Grip reference manual document the switches.
As I recall, you need to provide more that just the -r switch.

Do you really want to run grip in batch? Or do you want to run NX in batch, and run a grip program in NX?

Mark Rief
NX CAM Customer Success
Siemens PLM Software

 

[aek16]

Thank you Mark Rief for your reply

I want to run grip in batch and export the result as .prt or parasolid ...

is it possible ? what do I need to provide more than the -r switch ?

 

[aek16]

ip

 

[aek16]

Problem solved

in the command prompt : gripbatch -r -devsfile -n:<path for output file> <filespec>

this will generate an output file after execution

but in the grip file (.prt), a part must be activated in the beginning of the program : CREATE/PART,.....

to export the part file : CPATT/UPDATE,<path for exported part file>, <objlist>



thank you