What are the requirements to exhaust low-heat industrial appliances? Industrial oven rated 500 F and needing exhaust duct to flue hot gases out. I was informed to use class A double wall insulated duct and most of the duct manufacturers are not familiar with this classification. What is the insulation or wall thickness for class A double wall duct and what type of insulation is recommended for the specified oven temperature?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
Exhaust Duct
- Thread starter ben3929
- Start date
Check what you're cooking in the oven - if you've got some items which give off volatiles that your local environmental guys don't like, you may also need some sort of (much higher temp) afterburner.
As to a definition of Class A double wall:
Think about what you'd see as a chimney system for a wood stove, like in the following link.
Converting energy to motion for more than half a century
As to a definition of Class A double wall:
Think about what you'd see as a chimney system for a wood stove, like in the following link.
Converting energy to motion for more than half a century
- Status
Similar threads
- Locked
- Question