Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

expansive concrete

Status
Not open for further replies.

rmccabe

Materials
Jan 6, 2003
5
I am trying to find non-shrink cement or an expansive admixture. Type K from Blue Circle seems not to be available. I heard about calcium aluminosulfate and gypsum, but I don't want to have to do a lot of blending and testing. Anything off the shelf?
 
Replies continue below

Recommended for you

You could contact your local Cement Institute or Concrete Society to get names of manufacturers of pre-packaged products.
Some manufacturer/product names that come to my mind are
Fosroc, Sika, Conbex, Denka and Vandex.
 
Thanks for the response. These are good names, especially Denka, but I don't see any evidence that any of them are selling expansive cement, or grouts, or admixtures in North America.
 
I am in South Africa. Afraid I don't have any other leads for you.
 
We sometimes use bentonite in grout mix for boring closures. Not sure if this would work as admixture in concrete though.
 
hello

I`m in japan, an here they have many research about expansive material . Beside that Main office of Denka Corporation in in here, we aswalys use their product in our research, maybe you can contact this address for USA.



thank`s
Nice to discuss about this material in forum

Denka Corporation

780 Third Avenue, 32nd Floor, New York, NY 10017, U.S.A.
Telephone: 1(212)688-8700
Facsimile: 1(212)688-8727
E-mail: info@denkany.com
 
You can use Intrusion Aid its expansive admixture and available in North America
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor