Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Experience with Bentax USA, ionization air purifiers.

Status
Not open for further replies.

EEJaime

Electrical
Jan 14, 2004
536
Hello All,

I am an electrical engineer and I have just attended a meeting at which the Mechanical Contractor proposed to substitute Bentax Ionization units for the product our mechanical engineers specified. These are for an airport terminal where the owner is concerned about problems they have with Jet Fuel fumes entering the terminal concourses via the outside air intakes on the Air Handlers. It is an old problem and they have filtration on all the units but in this major renovation project we are doing we are replacing the fans, filter sections and adding an air purification system. These units would be located downstream of the pre-filters, secondary filters and final Hepa-filters.

As part of a "value engineering" excercise, the contractor has proposed these units. It turns out these are new to our HVAC guys and I thought I would ask this forum to see if anyone out there has experience with this particular manufacturer. They are at and Darien, CT.

Any insight would be appreciated.
 
Replies continue below

Recommended for you

I recognize that I should not advertise or promote product, however I would like it if you would contact . We are the original importers of this product in the U.S.A.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor