Mar 12, 2015 #1 dallas2000 Mechanical Apr 23, 2012 7 Is there any way to export a UGNX 7.5 model file to STL or IGES with the item callouts as found in the BOM? Any suggestions would help.
Is there any way to export a UGNX 7.5 model file to STL or IGES with the item callouts as found in the BOM? Any suggestions would help.
Mar 12, 2015 #2 Toost Mechanical Jan 18, 2011 2,995 Iges should support both partslist and balloons since Iges supports drawings. STL was originally meant to be used for Stereo Lithography machines. ( i.e "3D printers" ) I would be surprised if there was support for Partslists. Regards Tomas Upvote 0 Downvote
Iges should support both partslist and balloons since Iges supports drawings. STL was originally meant to be used for Stereo Lithography machines. ( i.e "3D printers" ) I would be surprised if there was support for Partslists. Regards Tomas
