Export points coordinate from NX to txt

[Jian Wang]

https://github.com/Plus-1000/Export-coordinate-of-points-from-NX_CADCAM-and-save-them-to-.txt

 

[cowski]

Saving the information listing to file then parsing that file seems a bit awkward. It would be easier to query each point's coordinates and write them out to a text file (csv) directly. The point object has a .Coordinates property that you can use to get the X, Y, Z values.

www.nxjournaling.com

 

[JohnRBaker]

There's a GRIP program floating around somewhere that does that, it's just that I no longer have access to any of those files, but someone might, so if you do, check it out.

John R. Baker, P.E. (ret)
Irvine, CA
Siemens PLM:

The secret of life is not finding someone to live with
It's finding someone you can't live without

 

[Rob_N]

There is a discussion on points to txt on the official board from few years ago

https://community.sw.siemens.com/s/...formati-need-a-excelxlsx-format-how-to-change

 

[Jian Wang]

Thanks you so much for the comments, my NX Open is not strong, I will try rewrite it later.