Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Export Spreadsheet View from Catia V6

Status
Not open for further replies.

mulhollp

Aerospace
May 15, 2013
4
Hi,

I would like to export the spreadsheet view from Catia V6 but have only one line for each part in the assembly tree i.e. one line item and qty as opposed to a different line item for each instance. The same way the BoM shows when you add one in a drawing for example.

Struggling to see how this is done.

Any help much appreciated.

Thanks
 
Replies continue below

Recommended for you

My own follow up on this, our reseller has indicated that this is not possible in our V6 install, OOTB at least. Where spreadsheet view will give only instances and not collate. Which seems like a step backwards from the V5 Analyse BoM tool but....looks like have to format within excel.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor