Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Face seal - helium leak testing

Status
Not open for further replies.

jclark11.1992

Mechanical
Oct 8, 2016
1
I am working with an industrial partner for my senior design class, we must isolate 4 regions on a aluminum cylinder and record helium leak rates at each location. My group is planning on using face seals. We are in the process of designing a test method for our proof of concept. Any tips, links, resources, or suggestions would be greatly appreciated.
 
Replies continue below

Recommended for you

Not really enough information. What temperature and pressure is the helium? When you say face seals are you o-rings? If so what material?
 
I am surprised you have not been red flagged for student posting.
But, if I were you I would research seal manufacturer's catalogs/websites for what you are trying to do.
Your industrial partner has either has a unique configuration to seal, thereby looking to your team for a new/fresh approach to sealing or they are giving you a bone. In either case as Chpal1984 as stated, you have not provided anything to help you with.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor