Fastener Allowable

[alexeu]

Can anyone out there help me with the following fastener allowables (i.e shear strength, tensile strength)

a) NAS 623
b) NAS 603
c) MS 35206
d) NAS 514
e) NAS 602
f) NASM 27039

If at all possible, does anyone know where I can download the spec sheet. Thanks in advance

 

[Lcubed]

NAS and NASM standards are developed by the Aerospace Industries Association, and can be purchased at their website. I don't know of a free source.

Go to

http://dodssp.daps.mil/

for MS documents. There is no charge for these.

Hope this helps.

 

[DELTA98]

TRY OUT THIS WEB SITE IT MAY HAVE THE INFO YOUR LOOKING FOR!

IN THE MIL HANDBOOK 5

LATER ACE!! EX BOEING ENGINEER!

http://euler9.tripod.com/index.html