May 16, 2013 #1 vijuoo7 Aerospace May 16, 2013 6 0 0 IN hi all i am doing fatigue analysis using msc patran as a preprocessor and nastran as a solver , wat are the inputs one should provide to carrry out the analysis thanks in advance
hi all i am doing fatigue analysis using msc patran as a preprocessor and nastran as a solver , wat are the inputs one should provide to carrry out the analysis thanks in advance
May 17, 2013 Thread starter #2 vijuoo7 Aerospace May 16, 2013 6 0 0 IN hi all i did some sol 101 for a simple plate , but i am getting zero results , i im attaching file , please help me Upvote 0 Downvote
hi all i did some sol 101 for a simple plate , but i am getting zero results , i im attaching file , please help me
May 19, 2013 #3 ZeroExperience Aerospace Jun 23, 2011 130 0 0 US MSC Nastran cannot do fatigue analysis at this point. You need MSC Fatigue to perform fatigue analysis. Upvote 0 Downvote
MSC Nastran cannot do fatigue analysis at this point. You need MSC Fatigue to perform fatigue analysis.
Aug 20, 2013 #4 gantovnik Aerospace Nov 9, 2011 15 0 0 US Now Nastran can do it Fatigue Analysis Integrated into MSC Nastran 2013 http://www.deskeng.com/articles/aabkmb.htm Upvote 0 Downvote
Now Nastran can do it Fatigue Analysis Integrated into MSC Nastran 2013 http://www.deskeng.com/articles/aabkmb.htm
Aug 28, 2013 #5 hezhj2000 Mechanical Aug 27, 2013 78 0 0 US What version of Nastran are you using? Only 2013 has embedded fatigue. Can you upload your bdf file? Upvote 0 Downvote