Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FEA verification: Uniformly loaded circle plate (simply supported at the edge)

Status
Not open for further replies.
Shu Jiang PEng SE

Shu Jiang PEng SE

Structural
Apr 29, 2008
229
0
16
US
A 0.5” thick and 40” diameter circle plate is simply supported at its edge and the uniformly is 5psi. The maximum stress of the plate from ANSYS is verified with theoretical solution ((formula is from p.141, Strength of materials, part II, advanced theory and problems, second edition, by S. Timoshenko).

The two figures show the bending stress distribution in Cylindrical coordinate system and Cartesian coordinate system respectively.
1_ydefhh.jpg

2_rzjshn.jpg
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Eranho
  • Locked
  • Question
How to get Circle centers from Named selection group 2023R2 Discovery/Spaceclaim
Replies
0
Views
16
Eranho
Eranho
bkal
  • Locked
  • Question
Mode Selection Based on the Mode Coefficients
Replies
0
Views
15
bkal
bkal
andradesilva
  • Locked
  • Question
how to print on the screen or export the axial inertia moment of a model, in ANSYS Mechanical APDL
Replies
1
Views
24
gnc89
gnc89
md_salem
  • Locked
  • Question
how to do share topology in the design modeler in Ansys Workbench
Replies
1
Views
13
Stick.
Stick.
andradesilva
  • Locked
  • Question
How to export to a text file results of analysis with material non-linearities, for all the substeps
Replies
0
Views
18
andradesilva
andradesilva
Back
Top