Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fiber-Cement Exterior Cladding

Status
Not open for further replies.

Inspector314159

Structural
Dec 19, 2020
6
Hi all,

I'm new here and i'm guessing you've all had this question before. Hopefully, it's an easy one. I'm an inspector and have looked at several homes with hardipanel exterior siding. I have a couple questions:
1. is it allowed for shear (seismic and wind) or does it have to have a structural sheathing under it?
2. if it isn't allowed, when did this change? seems like it used to be allowed.

It seems to me that it used to be allowed, but i've been asking around and some of the building departments no longer allow it.

I'm in sacramento, california. if that makes a difference.

Thanks!
 
Replies continue below

Recommended for you

It is allowed, at least on the internet. You should Google online and talk to a supplier/manufacturer. Link
 
I actually did quite a bit of research before i posted. It appears to be allowed, but it actually isn't. I talked with the manufacturer.
 
Interesting. They still produce and market it. I wonder where the product goes.

Don't bother, I have read your closing statement on your another thread.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor