Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FIBER OPTIC DRAWING SYMBOLOGY 1

Status
Not open for further replies.

HUTCHMO

Electrical
Jan 6, 2003
1
US
IS THERE SOMEWHERE THAT I CAN FIND DRAWING STANDARDS (IF THEY EXIST) FOR MAKING INTERCONNECTION DRAWINGS FOR FIBER OPTIC CABLES? CONNECTORS, FIBER NUMBERING/LABELING/COLOR CODING ETC.
 
Replies continue below

Recommended for you

Your question is multipart, and I will try to address each part seperately.
1) Although there are no "standardized" symbols, two sources you might research are:
A. ANSI/TIA/EIA-606-A, Administration Standard for Commercial Telecommunications Infrastructure, Dtd May 16, 2002.
B. Fiber Optic Reference Guide, by David R. Goff, third edition. This book is published by Focal Press
2) Optical Fiber color coding is addressed in ANSI/TIA/EIA-598-A, Optical Fiber Cable Color Coding.

3) AS for the labeling, administration, etc., consult ANSI/TIA/EIA-606-A listed above.

All the ANSI/TIA/EIA Documents shown are available from:
Global Engineering Documents (800) 854-7179
If you need further assistance or clarification, feel free to contact me direct at larry.hamlin@2asc.com.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top