loworange88
Mechanical
- Apr 30, 2009
- 40
Good Morning. Recently I have had an issue with UGNX 1899. Prior to this issue, when I hit CTRL F, the modelling view would fit the model to the field of view, no matter if it was a small part, or a large assembly. The same would happen with the HOME and END keys, I would get a zoomed to fit Tri-Iso, or Iso view respectfully. Lately however, CTRL F works as it should, but HOME and END give me the ISO views, but not at full zoom. Its almost like the model flys off into space. I tried to change the bounding box size in customer defaults, but no luck. This is also happening with another colleague. We would like to get back to the fully "zoomed to fit" ISO views.
Our system is managed by our parent facility in Germany, so I am not sure if they quietly pushed an update that caused this to change or if we inadvertently changed something on our end.
Thanks in advance.
EDIT: SOLVED. Right mouse click in model space down to Orient View. Custom Views was somehow set to have a scale. Changed the toggle back to FIT.
Our system is managed by our parent facility in Germany, so I am not sure if they quietly pushed an update that caused this to change or if we inadvertently changed something on our end.
Thanks in advance.
EDIT: SOLVED. Right mouse click in model space down to Orient View. Custom Views was somehow set to have a scale. Changed the toggle back to FIT.