Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

flagpole foundation design

Status
Not open for further replies.

Travis Roberts

Civil/Environmental
Joined
Mar 25, 2022
Messages
19
Location
US
HEllo All,

Looking for help in finding what code/manuals etc. are acceptable to use for designing a 35' flagpole foundation.

I'm in California, so wind speed is relatively low.

Figuring an 11' x 8' flag.....

any tips appreciated, but primarily just trying to figure out what literature is used for an engineered design. Thank you
 
from one source, for wind loads... ASCE may have different values.


Load is from thread

thread507-104293

and design of foundation can be embedded in granular material/concrete or attached to an embedded concrete foundation and secured by anchorrods.

-----*****-----
So strange to see the singularity approaching while the entire planet is rapidly turning into a hellscape. -John Coates

-Dik
 
Thank you dik, I will look at the threads
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top